Broadcast Tools DSC-20 Manual de instalación descargar pdf (Pagina 22)

Preliminary 8-2002 RSHD Smartcaster Installation Manual

channels one through eight from being routed to record, and 19 ( Clear Both ) which does

a combination of 17 and 18.

If there are more then one RIDZ switchers, the numbers run from 1 to 16, and if there are

3 RIDZ switcher they run from 1 to 24. Then the routing for the record bus commands

are next, finally the clear commands. Notice that you can apply the real names of the

device to the channels of the RIDZ for reference. Because most receivers can be multi

channel, it is helpful to note the source device. Names like Starguide #2-“A” rather than

CNN are ultimately more informative than just format info.

Fig. 1.4. The front panel of the RIDZ Switcher

showing the Auto/Manual switch, channel selection

knob, and Program and Record buttons.

The third way is to manually switch the RIDZ. The operator may switch the red toggle

switch from Auto to Manual, rotate the dial knob to the number of the desired channel,

and press the red button if the channel should go on the air, and the white button if the

channel should go to the record bus. The LED display on the far right of the front panel

will show the channel that is currently being used.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 56 57

Sin comentarios

Broadcast Tools DSC-20 Manual de instalación Pagina 22