Broadcast Tools DSC-20 Manual de instalación descargar pdf (Pagina 12)

Preliminary 8-2002 RSHD Smartcaster Installation Manual

Figure 5-Crimp tool in action

Now repeat this entire procedure to put an RJ-45 plug on the other end of the cable. Use the

exact same wiring scheme as on the first end, which will make it a straight-through cable.

Note: If you decided to spend a couple extra bucks on the strain relief sleeves, be sure to put

them on and facing the correct direction before you crimp the second end.

Computer setup

Connect the LAN cables from the hub to the CPU on both the RSHD audio device and

the Smartcaster control computer.

(Photo)

Serial cable from Smartcaster to RSHD

Connect the serial cable from the Smartcaster Control computer serial port 1 to the RSHD

computer Serial Port 1

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 56 57

Sin comentarios

Broadcast Tools DSC-20 Manual de instalación Pagina 12