Broadcast Tools ProMix 12 Especificaciones descargar pdf (Pagina 5)

ee--mmaaiill::

[email protected]

vvooiiccee::

360.854.9559

ffaaxx::

866.783.1742

ProMix 12 Installation and Operation Manual

INSTALLATION

2.1.6 MAIN MIX BUS OUTPUTS

The console’s six main mixing bus outputs appear on male XLR connectors (5). All

outputs are electronically balanced; each will drive a 600-ohm load. The nominal

level is +4dBm. Connect as follows:

PIN 1: Ground

PIN 2: Hi

PIN 3: Lo

Note: To feed an unbalanced load, connect to Pins 1 & 2 only. DO NOT

SHORT PIN 3 TO GROUND!

It is not necessary to terminate any console outputs.

2.1.7 MONITOR OUTPUT

The console’s Monitor outputs (6) are via a T/R/S jack. These outputs are unbal-

anced, and will drive 600-ohm loads. (Termination is not necessary.) The nominal

level is –10dBm. Connect the mating TRS plug as follows:

TIP: Left Monitor output

RING: Right Monitor output

SLEEVE Ground

2.1.8 BOOTH OUTPUT

The console provides a secondary Booth monitor output (7) that can be used to drive

headphones worn by an announcer in an “announce booth”. This output, via T/R/S

jack, will drive headphones of 24 ohms or higher. (Termination is not necessary.)

The nominal output level is 0dBm. The mating TRS plus should be wired as fol-

lows:

TIP: Left Booth output

RING: Right Booth output

SLEEVE: Ground

2.1.9 CUE/TALKBACK OUTPUTS

The console provides outputs to drive external amplified speakers for monitoring the

Cue bus and Talkback circuit (8). Using the Cue output is optional, as the Cue bus

can be monitored via the Monitor system (with the CueMix function) as well as via

the Phones output. The Talkback output must be connected to an external (ampli-

fied) speaker if this feature is to be used. The Cue and Talkback outputs are unbal-

anced and will drive 600-ohm loads to a nominal level of –10dBm. (Termination is

not necessary.) Inexpensive “computer speakers” are ideal for use with the Cue and

Talkback outputs (audio quality unimportant). The mating T/R/S plug should be

wired as follows:

TIP: Cue output

RING: Talkback output

SLEEVE: Ground

WEBSITE:

Visit our web site for

product updates and

additional information.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Comentarios a estos manuales

Sin comentarios

Broadcast Tools ProMix 12 Especificaciones Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Mezcladores de audio Broadcast Tools ProMix 12