Broadcast Tools ADMS 44.22 Manual de servicio descargar pdf (Pagina 205)

Reference 205

Property

REQ

Description

sent to the external device.

Append <LF>

When this property is checked, a Line Feed (Decimal 10, Hex OA)

is appended to the Command String when sent to the external

device.

When both Append <CR> and Append <LF> are checked, they are appended

to the Command String in conventional order - Carriage Return followed by Line

Feed. If you need to reverse this order, use the [Insert Control Code] button to

insert them manually directly into the Command String and uncheck both of

these properties.

Inserting Control Codes in the Command String

Control codes are defined as Decimal values 0 through 31 and as the name implies, are traditionally

used for special "control" characteristics of a device receiving the Command String. Control codes

might be used to mark the beginning or end of a command sequence, for instance.

Control codes can be placed anywhere in the Command String field, either by correctly typing the

control code representation or using a pop-up control code selection dialog. Place the cursor in the

position in the Command String field where you want to insert a control code and click on the [Insert

Control Code] button.

Control code insertion dialog

Select the control code you wish to place in the Command String and click on the [Insert] button. The

control code representation will be inserted at the cursor position.

Send Command Examples

When you have finished setting the Send External Command properties, the displayed information will

appear similar to the examples shown here, with the command string previewed in either Hex or

Control Code mode. Click on the [Apply] button to save your changes.

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 361 362

Sin comentarios

Broadcast Tools ADMS 44.22 Manual de servicio Pagina 205