Broadcast Tools SS 2.1/Terminal III Especificaciones descargar pdf (Pagina 10)

e-mail:

[email protected]

voice:

360.854.9559

fax:

866.783.1742

SS 2.1 Term III Installation and Operation Manual

INSTALLATION

* SAGE ENDEC INSTALLATION GUIDELINES

Dip Switch Setup: Follow the tables below for setup options:

Unit ID: SW5-1 SW5-2

ID 0 * OFF OFF

ID 1 ON OFF

ID 2 OFF ON

ID 3 ON ON

Station ID: SW5-3 SW5-4

2 ON OFF

1 * OFF OFF

3 OFF ON

4 ON ON

Operation: SW5-6 SW5-7

Normal * OFF OFF

Sustained ON OFF

EAS switcher OFF ON (SAGE/ENDEC, MSRP Clone, 1200 baud serial)

Toggle ON ON

Note: After changing any dipswitch, please repower the unit. * Denotes factory setting.

Connecting a single SS 2.1 III/Term to the Sage ”Endec” serial port:

Attach the supplied “S9” DB-9 female adapter to the Sage serial port. Connect the module

cable to the adapter and the other end to the RJ11 on the SS 2.1 III/Term. Configure the

above dip switch SW5 for the desired operation.

Connecting two or more SS 2.1 III/Term’s to the SAGE “Endec” Serial Port:

Multiple SS 2.1 III/Term may be cascaded serially to operate from the same serial port. The first

step is to assign ID’s to each SS 2.1 III/Term. One suggestion is to assign ID1 to the first SS 2.1

III/Term and ID2 to the second switcher. The second step is to assign a station ID to each switch-

er. The third step is to parallel the serial ports of the SS 2.1 III/Term’s. Plug the male end of the

duplex modular adapter into the supplied female “S9”, DB-9 to RJ-11 adapter, then attach the

supplied reversed modular line cords into each of the duplex modular adapter receptacles (Radio

Shack Cat No. 279-0357) and the other ends into each of the SS 2.1 III/Term modular recepta-

cles. See the diagram below. NOTE: Three or more SS 2.1 III/Term’s may be daisy chained by

using the above description and a Radio Shack Cat No. 279-0410, 5-jack modular adapter.

WEBSITE:

Visit our web site for

product updates and

additional information

The pin out of the adapter is shown below.

RJ-11

Adapter

DB-9

D-Sub

SS 2.1 Term III

(Point of view)

4 3 RS-232 Receive

3 2 RS-232 Transmit

2 5 Ground

1423

Modular Jack Pin

Numbers

To SS 2.1 III/Term #1

To SS 2.1 III/Term #2

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios

Broadcast Tools SS 2.1/Terminal III Especificaciones Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Broadcast Tools SS 2.1/Terminal III